跳到主要內容區

機械工程系(所)

  1. 首頁
  2. 師資介紹
  3. 兼任教師

廖德潭

廖德潭 Te-Tan Liao照片
姓名 廖德潭 Te-Tan Liao
職稱 兼任教授
電話 (06)5979566 ext. 5830
傳真 (06)5977510
信箱 ttliao@mail.feu.edu.tw
兼任職務
機械四德、機械四智導師
學歷
◆國立成功大學機械研究所碩士
◆國立成功大學機械研究所博士
經歷
◆遠東技術學院機械系講師
◆遠東科技大學機械系副教授
研究領域
◆歪斜光線追蹤分析
◆材料機械性質分析
◆光學量測
著作及研究成果
證照：
機械製圖乙級（證照編號：006-006494，發證單位：行政院勞工委員會）

著作：
A、Journal
◆(1). Lin Psang Dain and Te-Tan Liao, "Skew-Ray Tracing and Sensitivity Analysis of Geometrical Optics ," Transactions of the ASME Journal of Manufacturing Science and Engineering, Vol. 122, pp. 338-349, 2000. (SCI) (IF=0.536) (Rank=23/38) (Engineering, Manufacturing)

◆(2). Te-Tan Liao and Psang Dain Lin, "Analysis of Optical Elements with Flat Boundary Surfaces," Applied Optics, Vol. 42, No. 7, pp. 1191-1202, 2003. (SCI) (IF=1.717) (Rank=13/56) (Optics)

◆(3). Psang Dain Lin and Te-Tan Liao, "A New Model of Binocular Stereo Coordinate Measurement System Based on Skew Ray Tracing," Transactions of the ASME Journal of Dynamic System, Measurement, and Control, Vol. 126, pp. 102-114, 2004. (SCI) (IF=0.658) (Rank=28/51) (Automation & Control System)

◆(4). Te-Tan Liao and Jing-Fung Lin, "Modeling and Performance Evaluation of Optical Systems Using Skew Ray Tracing," Transactions of the Canadian Society for Mechanical Engineering, Vol. 31, No. 2, pp. 143-156, 2007. (SCI) (IF=0.112) (Rank=100/106) (Engineering, Mechanical) (NSC93-2212-E-269-014)

◆(5). Te-Tan Liao and Psang Dain Lin, "Optical Modeling and Analysis of Laser Centering Tester," Journal of Key Engineering Materials, Vols. 364-366, pp. 504-509, 2008. (SCI&EI)

◆(6). Te-Tan Liao, "A Skew Ray Tracing-based Approach to the Error Analysis of Optical Elements with Flat Boundary Surfaces," Optik-International Journal for Light and Electron Optics, Vol. 119, pp. 713-722, 2008. (SCI) (IF=0.585) (Rank=41/56) (Optics) (NSC94-2212-E-269-006)

◆(7). Te-Tan Liao, "Decentration error analysis using optical centering device and skew ray tracing," JSME Journal of Advanced Mechanical Design, Systems, and manufacturing, Vol. 1, No. 5, pp. 605-615, 2007. (New Journal) (NSC95-2221-E-269-013)

◆(8).Jing-Fung Lin, Te-Tan Liao, Yu-Lung Lo and Sen-Yung Lee, “The optical linear birefringence measurement using a Zeeman laser,” Optics Communications, Vol. 274, pp. 153-158, 2007. (SCI) (IF=1.48) (Rank=18/56) (Optics)

◆(9). Te-Tan Liao, Shih-Hung Chen, Jing-Fung Lin and Chun-Ta Chen, "Modeling and Analysis of Transmission Optical Centering Device," Transactions of the Canadian Society for Mechanical Engineering, Vol. 32, No. 1, pp. 67-80, 2008. (SCI) (IF=0.112) (Rank=100/106) (Engineering, Mechanical)(NSC96-2221-E-269-003)

◆(10). Psang Dain Lin and Te-Tan Liao, “An Effective-Wire-Radius Compensation Scheme for Enhancing the Precision of Wire-Cut Electrical Discharge Machines,” International Journal of Advanced Manufacturing Technology, Vol. 40, No. 3-4, pp. 324-331, 2009. (SCI) (corresponding author) (IF=0.418) (Rank= 27/38) (Engineering, Manufacturing)

◆(11). Te-Tan Liao and Chun-Ta Chen, “A skew ray tracing approach for the error analysis of optical elements with spherical boundary surfaces,” Journal of Modern Optics, Vol. 55, Issue 12, pp. 1981 – 2002, July 2008. (SCI) (IF=1.189) (Rank=23/56) (Optics) (NSC 95-2221-E-269-013)

◆(12). Chun-Ta Chen and Te-Tan Liao, “Optimal path programming of the Stewart platform manipulator using the Boltzmann-Hamel-d’Alembert dynamics formulation model,” Advanced Robotics, Vol. 22, pp. 705-730, 2008. (SCI) (IF=0.318) (Rank=10/12) (Robotics)

◆(13). Te-Tan Liao, “A Skew Ray Tracing Approach for the Error Analysis of Optical Elements with Paraboloidal Boundary Surfaces,” Optik-International Journal for Light and Electron Optics, doi:10.1016/j.ijleo.2008.03.017, 2008 (In press) (SCI) (IF=0.585) (Rank=41/56) (Optics)

◆(14). Te-Tan Liao, “Skew Ray Tracing and Error Analysis of Optical Elements with Ellipsoid Boundary Surfaces,” Optica Applicata, Vol. 4, pp. 677-692, 2008. (SCIE) (IF=0.312) (Rank=50/56) (Optics)

◆(15). Te-Tan Liao, “Modeling and Analysis of Laser Shaft Alignment Using 4x4 Homogeneous Coordinate Transformation Matrix,” Measurement, Vol. 42, pp.157-163, 2009. (IF=0.525) (Rank=37/53) (Instruments and Instrumentation) (NSC96-2221-E-269-003)(SCIE)

◆(16). Te-Tan Liao and Chieh Kung,“High temperature mechanical and electrical properties of W-particle reinforced Cu-matrix composites from improved electroless plated powders,”Proceedings of the Institution of Mechanical Engineers, Part C- Journal of Mechanical Engineering Science, 2008. DOI:10.1243/09544062JMES1343 (In press)(SCI)

◆(17). Shih-Hung Chen and Te-Tan Liao, “An automated IC chip marking inspection system for SMD taping machines,” Journal of Scientific & Industrial Research, Vol. 68, May 2009, pp.361-366. (corresponding author)(SCIE)

◆(18). Te-Tan Liao, Shih-Hung Chen, Kuo-Ying Chen and Chun-Ta Chen, "Skew Ray Tracing and Error Analysis of Optical Lens with Cylindrical Boundary Surface,” Transactions of the Canadian Society for Mechanical Engineering, 2008 (SCI) (IF=0.112) (Rank=100/106) (Engineering, Mechanical)(accept)(will be published in Vol.33, No.2, 2009)

◆(19). Shin-Yong Chen, Chieh Kung, Te-Tan Liao and Yen-Hsien Chen, “Dynamic Effects of the Interference Fit of Motor Rotor on the Stiffness of a High Speed Rotating Shaft,” Journal of Scientific & Industrial Research, 2009. (submit).

◆(20). Shih-Hung Chen, Te-Tan Liao and Chun-Ta Chen, “A new approach for the rapid dimensional inspection of IC carrier tape,” Proceedings of the Institution of Mechanical Engineers Part E- Journal of Process Mechanical Engineering, 2009. DOI 10.1243/09544089JPME241 (In press)(SCI). (corresponding author

◆(21). Chun-Ta Chen and Te-Tan Liao, “A Hybrid Strategy for Time and Energy-Efficient Trajectory Planning in Parallel Platform Manipulators,” Robotics and Computer-Integrated Manufacturing, 2008. (submit)

◆(22). Te-Tan Liao, Chieh Kung, Kuo-Ying Chen, Ming-Shuing Chuang and Da-Peng Han, “The influences of powder mixing process on the quality of W-Cu composites,” Transactions of the Canadian Society for Mechanical Engineering, 2009. (submit)

◆(23). Te-Tan Liao, Chieh Kung, Kuo-Ying Chen and Da-Peng Han, “Investigation on the Arc Erosion Behavior of Cu-matrix Composites,” Proceedings of the Institution of Mechanical Engineers, Part C- Journal of Mechanical Engineering Science, 2009. (submit)

◆(24). Chun-Ta Chen and Te-Tan Liao, “Optimal Singularity-Free Trajectory Planning of Parallel Platform Manipulators,” Advances in Robot Manipulators (ISBN 978-953-7619-X-X), 2009. (accept)


B、Conference
1. Psang Dain Lin, Chia-Hung Lu and Te-Tan Liao, "A New Model of Binocular Stereo Vision," International Symposium on Precision Mechanical Measurement, August 11-16, Hefei-Jinan, China, pp.4-228-4-231, 2002.

2. Te-Tan Liao and Psang Dain Lin, “Optical Modeling and Analysis of Laser Centering Tester,” Proceedings of APCOM2007: 2007 Asia Pacific Conference on Optics Manufacture 2007, 11-13 January 2007, Hong Kong, paper number #128TW.

3. Te-Tan Liao, Jing-Fung Lin and Chia-Hung Lu, “Measurement of modulation transfer function of an optical system by using skew ray tracing,” The 2nd International Conference on Advanced Nondestructive Evaluation, Korea, October 17-19, 2007, paper number #2007-146. 見論文摘要 P. 216.

4. Jing-Fung Lin , Te-Tan Liao and Chih-Chao Chang, “Measuring circular birefringence in a chiral medium using Mueller calculus, " The 2nd International Conference on Advanced Nondestructive Evaluation, Korea, October 17-19, 2007, paper number #2007-239. 見論文摘要 P. 45.

5. Jing-Fung Lin , Te-Tan Liao and Chih-Chao Chang, “Measurement of the concentration of glucose by a circular polariscope with electro-optic modulation, “ The 2nd International Conference on Advanced Nondestructive Evaluation, Korea, October 17-19, 2007, paper number #2007-242. 見論文摘要 P. 217.

6. Cheng-Chi Wang, Her-Terng Yau, Ming-Jyi Jang, Yen-Liang Yeh, Te-Tan Liao, "Application of DT Method to Bifurcation Analysis of Microcandilevers with Proportional-Plus-Derivative Control," The 2009 IEEE International Conference on Networking, Sensing and Control (IEEE ICNSC'09) , Okayama, Japan on March 26-29, 2009.(accept)

C、國內研討會
  1. C. J. Kung and T. T. Liao, "Study of Fatigue Crack Growth of Aluminum Alloy 7075-T6 on Time Series Analysis,"中華民國第十二屆全國力學會議, PP.493-500, 民國85年12月，.
  2. C. C. Chen, F. S. Yen, T. T. Liao, C. J. Chu, "以非晶質二氧化矽披覆氧化鋁粉末製備富鋁紅柱石複合陶瓷," 中國材料科學學會，PP.340-343, 民國85年.
  3. 龔傑, 廖德潭, "評估結構系統疲勞及破壞可靠度的方法," 第十二屆全國技術及職業教育研討會（工業類）, PP.185-194, 1997年4月.
  4. 廖德潭, 詹添印, 朱弋鵬, "燒結鎢鉬重合金之研究," 陸軍官校75週年校慶綜合學術研討會，336-342,88年5月.
  5. 陳智成, 陳長義, 顏富士, 廖德潭, "15vol﹪ZrO2-氧化鋁微粒陶瓷緻密化過程," 中國材料科學學會, 1998年.
  6. 廖德潭, 林昌進, "雙CCD照相機表面座標量測系統的建模與模 擬," 中國機械工程師學會第17屆全國學術研討會, pp.325-332, 2000.
  7. 廖德潭, 林昌進, "高精度立體成像座標量測系統," 第十二屆全國 自動化科技研討會，雲林虎尾技術學院，論文摘要集p.89.
  8. 廖德潭, 謝榮發, 盧嘉鴻, 林昌進, "光學系統感測平面感測值離散分析," 中國機械工程師學會第18屆全國學術研討會, pp.859-866, 2001.
  9. 謝榮發, 廖德潭, 林昌進, "含球型接頭之空間機構設計," 中國機械工程師學會第18屆全國學術研討會, pp.695-702, 2001.
  10. 陳建人, 陳峰志, 蔡玉峰, 廖德潭, 林昌進, "平坦邊界光學元件光線追蹤分析," 中國機械工程師學會第20屆全國學術研討會, pp.1221-1228, 2003.
  11. Te-Tan Liao, Jing-Fung Lin, Cheng-Chi Wang, Kwo-Hua Tseng, "A New Model of the Optical System Performance Evaluation Based on Skew Ray Tracing," 中國機械工程師學會第22屆全國學術研討會, 製造與材料D-II, pp. 875-880, 2005.
  12. 陳峰志, 廖德潭, 陳錦堂, 陳國英, "雷射對心機的光學建模與分析," 中國機械工程師學會第22屆全國學術研討會, 製造與材料D-II, pp. 793-800, 2005.
  13. 林俊鋒, 廖德潭, 汪正祺, 羅裕龍, "A New Proposed Phase Retardation Meter," 中國機械工程師學會第22屆全國學術研討會, 新興工程技術 E-II, pp. 615-620, 2005.
  14. Kung-Ming Chung, Te-Tan Liao, "Shock Induced Separation of Transonic Convex-Corner Flows," 2005中國航太學會/中華民航學會聯合學術研討會, 2005.
  15. Cheng-Chi Wang, Te-Tan Liao, Jing-Fung Lin, Yen-Liang Yeh, "Nonlinear Behavior and Dynamic Analysis of Herringbone Grooved Gas Journal Bearings," 中華民國力學學會第二十九屆全國力學會議, 論文集(三), pp.H006-1~H006-8, 2005.
  16. 廖德潭,林俊鋒,汪正祺,陳國英,曾國華, "立體角鏡歪斜光線追蹤分析," 中國機械工程師學會第23屆全國學術研討會, 製造與材料D-III, pp. 191-196, 2006.
  17. 汪正祺, 鐘明吉, 廖德潭, 葉彥良, "Bifurcation Analysis of a Flexible Rotor Supported by a Spherical Aerodynamic Journal Bearing System," 中國機械工程師學會第23屆全國學術研討會, 固力與設計C-I, pp. 149-154, 2006.
  18. 林俊鋒, 廖德潭, 汪正祺, 吳志祥, "Heterodyne Interferometer for Measuring the Linear Birefringence," 中國機械工程師學會第23屆全國學術研討會, 新興工程技術E-II, pp. 63-68, 2006.
  19. Lin Jing-Fung, Syu Chang-Ding, Liao Te-Tan and Chang Chih-chao, “ A new circular heterodyne interferometer for measuring glucose concentration,” 2007 Intelligent Systems Conference on Engineering Applications, Far East University, Tainan, March 20, 2007.
  20. Te-Tan Liao, Jing-Fung Lin, Cheng-Chi Wang and Bing-Hsun Wu, " Error Analysis of Optical Elements with Flat Boundary Surfaces Based on Skew Ray Tracing," 中國機械工程師學會第24屆全國學術研討會, 論文編號: D17-0015, pp. 4321-4326, 2007.
  21. 廖德潭, 廖宗德, 陳國英, 郭家良, "鎢粒子強化銅基複合材料的機電性質研究," 中國機械工程師學會第24屆全國學術研討會, 論文編號: D10-0020, pp. 2961-2966, 2007.
  22. Cheng-Chi Wang, Yen-LianYeh,　Te-Tan Liao,　Jing-Fung Lin, 　　"Application of a Hibrid Numerical Method to the Nonlinear Dynamic Analysis of a Spherical Gas Bearing System, " 中國機械工程師學會第24屆全國學術研討會, 論文編號: B02-0002, pp.1293-1298, 2007.
  23. Jing-Fung Lin, Jyh-Shyang Wu, Te-Tan Liao, Cheng-Chi Wang, and Chih-Chao Chang, "A New Electro-optically Modulate Circular Heterodyne Interferometer for Measuring the Optical Rotation Angle,"中國機械工程師學會第24屆全國學術研討會, 論文編號: E05-0004, pp. 5417-5422, 2007.
  24. 陳俊達,廖德潭,王昭惟, "自主式視覺導引在機器人輪椅上階梯之研究," 中國機械工程師學會第24屆全國學術研討會, 論文編號: B17-0020, pp. 1879-1884, 2007.
  25. 陳國英, 廖德潭, 郭冠鴻, "稀土元素La、Ce對A356.2鋁合金顯微組織及機械性質之影響,"中國材料科學學會全國學術研討會, 論文編號: P08-060, 見論文摘要 P. 388, 2007.
  26. Te-Tan Liao, Yu-Wei Lee, Cheng-Chi Wang and Jing-Fung Lin, " Modeling and Analysis of the Laser Shaft Alignment, "中國機械工程師學會第25屆全國學術研討會, 論文編號: 0361, 2008.
  27. Jing-Fung Lin, Jyh-Shyang Wu, Te-Tan Liao, Cheng-Chi Wang, and Chih-Chao Chang, "Applying a Rotating-Wave-Plate Stokes Polarimeter for Measuring the Optical Rotation Angle,"中國機械工程師學會第25屆全國學術研討會, 論文編號: 0341, 2008.
D、技術報告
  1. 國科會專題研究報告, "光學系統性能評價的建模與分析," (2004-08 至 2005-07，計劃編號：NSC93-2212-E-269-014)。
  2. 國科會專題研究報告, "平坦邊界光學元件歪斜光線追蹤的誤差分析," (2005-08 至 2006-07，計劃編號：NSC94-2212-E-269-006)。
  3. 國科會專題研究報告, "球面邊界光學元件歪斜光線追蹤的誤差分析," (2006-08 至 2007-07，計劃編號：NSC 95-2221-E-269-013)。
  4. 國科會專題研究報告, "非對稱光軸之光學系統的成像分析與設計(I)," (2007-08 至 2008-07，計劃編號：NSC 96-2221-E-269-003)。

E、專利發明
林俊鋒，廖德潭，張智超，發明專利名稱：測量光學旋轉角之裝置，審核中。

F、專書：
詹添印，廖德潭，周漢標，”機械材料實驗”，全華科機圖書，民國86年
瀏覽數: